MINOLTA-QMS Magicolor 2 Desklaser Specifications download pdf (Page 89)

$1

..#

.$ 



1 In the printer driver (Paper tab, Paper Type option), select Transparency.

2 Remove the media cassette from the printer (and remove any media in the

cassette).

3 Load the new media.

Type

 Use any transparencies (also known as OHP film) that meet normal photo-

copier standards and that can withstand the fusing temperature (392

° F/

200

° C). We recommend

–

Xerox 3R3117

–

3M CG3700

–

3M CG3710

 Use only transparency sizes letter and A4.

Weight

24–41.75 lb (90–157 g/m

)

Print Mode

Transparency

Notes

 Do not fan transparencies before printing.

 Be sure to feed the striped edge as the trailing edge, although the trans-

parency vendor may recommend that the striped edge is first into the

printer.

 Keep the media path clean. Transparencies are especially sensitive to a

dirty media path. If there are shadows on either the top or the bottom of

the sheets, refer to chapter 6, “Maintenance,” for instructions on how to

clean the printer.

 Check your application documentation for other information about printing

on transparencies.

 Remove transparencies from the output tray immediately to avoid static

buildup.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 275 276

No comments

MINOLTA-QMS Magicolor 2 Desklaser Specifications Page 89