MINOLTA-QMS Magicolor 2 Desklaser Specifications download pdf (Page 78)



 



This chapter describes how to refill the media cassette, print on different types

of media, prevent media jams, and cancel a print job, as well as how to replace a toner

cartridge.

Two types of media cassettes are available for the

magicolor

2 DeskLaser: the

standard letter/A4 cassette and the optional universal cassette. Both cassettes

work in either the upper or lower input feeder location. In addition, the printer pro-

cesses media in one of three modes—Standard [Plain Paper], Thick Stock, and Trans-

parency—to adjust for the fusing rate for envelopes, labels, glossy stock, thick stock,

transfer media, and transparency media.

,

This section discusses loading the media cassette with paper. If you’re using

another type of media, refer to “Using Media Other than Plain Paper” on page 3-6

for information.

..

Input

Cassette Letter/A4 or universal

Location Upper input feeder or optional lower input feeder for standard

(plain paper) media

Capacity 250 sheets of 20 lb (75 g/m

) paper; capacity for other weights

varies accordingly

Type 

Any standard or recycled office paper suitable for plain-paper laser print-

ers, such as

–

Xerox 4024

–

Hammermill Laser Print



Letterhead/memo paper

Weight



Long-grain plain paper, 16–24 lb bond (60–90 g/m

)

Print Mode



Standard (Plain Paper)

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 275 276

No comments

MINOLTA-QMS Magicolor 2 Desklaser Specifications Page 78