MINOLTA-QMS Magicolor 6110 GN User's Guide download pdf (Page 50)

Loading Media48

Click OK.

The duplex unit accessory requires at least one lower feeder

unit installed.

Using Media Other Than Plain Paper

Attention

Although the magicolor 6110 was designed for occasional printing on a

wide range of media types, it is not intended to print exclusively on a

single media type except plain paper. Continuous printing on media

other than plain paper (such as envelopes, glossy stock, labels, thick

stock, or transparencies) may adversely affect print quality or reduce

engine life.

For media other than standard plain paper or transparencies, both the driver

(Paper tab, Paper Type option)

and

the Media key on the Control Panel need

to be selected to tell the printer that thick stock is loaded. It is important to use

the Media key to set the tray to the appropriate media type in order to obtain

optimum printing results and to enable the toner to adhere better.

Loading and Printing Envelopes

In the printer driver (Paper tab, Paper Type option), select Thick Stock.

On the control panel, press the Media key to select printing on thick stock,

if necessary.

Place the envelopes on a flat surface, and flatten them by pressing down

the corners.

Flex the envelope stack (including the edges) to remove any stiffness.

Correct any bent corners, and then tap the

envelopes on a flat surface to align them.

Remove the upper media tray from

the printer (and remove any media in

the tray).

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 215 216

No comments

MINOLTA-QMS Magicolor 6110 GN User's Guide Page 50