MINOLTA-QMS Magicolor 6110 GN User's Guide Page 118

  • Download
  • Add to my manuals
  • Print
  • Page
    / 216
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 117
Cabinet116
8
To test the BuzzBox, make sure its switches are on, then press the
printer’s Online key to take the printer off line.
5"
You can use the BuzzBox switches to enable or disable the
buzzer, the light, or both. When the printer goes off line, the light
flashes and the buzzer sounds until the printer is placed back on
line or until the light and buzzer switches are turned off.
Using BuzzBox
When the BuzzBox lights or buzzes, check the printer message window to
find out what has interrupted printing. See “Status, Error, and Service
Messages” on page 97 for a list of printer messages and how to respond
to them.
Remember that pressing the Online key to enter the printer configuration
menu triggers the BuzzBox alarm.
Cabinet
Several models of printer cabinets are available. Follow the assembly instruc-
tions included with it.
Color Calibration Kit
Follow the instructions included with the kit if the Calibration Card and
ColorEncore Brochure are used to color calibrate your printer and monitor.
Dual In-Line Memory Modules (DIMMs)
Dual in-line memory modules (or DIMMs) are compact circuit boards with sur-
face-mount memory chips.
Your magicolor 6110 printer comes with 192 MB SDRAM of printer memory.
However, you can upgrade the magicolor 6110 to a maximum of 384 MB of
RAM through the installation of additional DIMMs. Additional memory must
be 32, 64, or 128 PC-100 Compliant SDRAM DIMMs.
Additional memory allows you to download more fonts and increase the
printer's buffer (area where data sent from the computer is stored while wait-
ing to be printed).
Page view 117
1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 215 216

Comments to this Manuals

No comments